Free shipping and returns

EXPLORE FEATURES

DESCRIPTION
  • Amplifier: 19 Inches/2U (removable racking brackets)
  • Dual Mono Design (2x700W/4 Ohms), DSP controlled
  • DSP version W1.0 optimized for our WATERFALL PRO CUSTOM SERIES range of speakers
  • “SUB” mode program for SUB600 & SUB600S / “SPEAKER” mode program for LCR300 & LCR500
  • Providing maximum performance & total driver security: Amp/SUB & Amp/Speakers
  • XLR/RCA analog inputs
SPECIFICATIONS

KEY POINTS
Amplifier: 19 Inches/2U (removable racking brackets)
Dual Mono Design (2x700W/4 Ohms), DSP controlled
DSP version W1.0 optimized for our WATERFALL PRO CUSTOM SERIES range of speakers
“SUB” mode program for SUB600 & SUB600S / “SPEAKER” mode program for LCR300 & LCR500
Providing maximum performance & total driver security: Amp/SUB & Amp/Speakers
Exclusive technologies driven by the DSP:
X-GUARD™ : Real time processing control of driver’s cone excursion (“SUB” mode)
U-GUARD™ : Real time processing control of power/voltage and advanced soft clipping
to protect subs and speakers
T-GUARD™ : Real time processing control of thermal level of power stage and
voice coil temperature of subs and speakers
X-TEND™ : Bass extension processing in the infra low frequency (20-35 Hz bandwidth).
Active in “SUB” mode (NB: results in lower SPL Max)
CSC™ : (Cinema Screen Compensation): progressive correction of the frequency response (>1Khz)
to compensate the screen sound absorption for Left, Center,& Right speakers
(CSC™ only on “Speaker” mode )
XLR/RCA analog inputs
Possible digital link between RS700 depending on the application (DIGITAL SPDIF IN/OUT)
XLR outputs driven by DSP for specific applications
Trigger control IN/OUT (12V)
Controlled and silent ventilation integrating accessible and renewable anti dust filters
Settings protection by a front plate with mechanical locking system


AUDIO APPLICATIONS

Luxury residential private Cinema Room
Professional applications (Studio MONITOR) with WATERFALL PRO CUSTOM SERIES range of speakers
(High SPL with no distortion)


TECHNICAL DETAILS

NOMINAL POWER/4 OHMS/SINUS 12 SECONDS 2 CHANNELS DRIVEN

2 x 700 W RMS

NOMINAL LOAD IMPEDANCE

4 - 16 Ohms

MINIMAL LOAD (ON IMPEDANCE CURVE)

3 Ohms

MAXIMUM PEAK CURRENT (POWER STAGE THRESHOLD)

2 x 30 A

FREQUENCY RESPONSE IN « SPEAKER » MODE

2 Hz - 45 kHz (-3dB)

PHASE ROTATION IN « SPEAKER » MODE

2° @ 30 kHz

FREQUENCY RESPONSE IN « SUB » MODE

2 Hz to 35-150 Hz (12 ou 24 dB/oct) or 2 - 350 Hz (LFE) / (-3dB)

DISTORTION THD+N AT NOMINAL POWER

< 0.06%

DAMPING FACTOR (1 KHZ / 4 OHMS)

> 1000

CONVERSION AD/DA « PREMIUM »

2 inputs / 4 differential outputs - 32 bits

DSP INTELLIGENCE

32 bits - 295 MHz Sigma DSP

SAMPLING FREQUENCY

96 kHz - 24 bits audio resolution

DIGITAL LATENCY (NUMERICAL LOOP INCLUDED)

1.95 ms

SIGNAL TO NOISE RATIO

110 dB

CROSSTALK (1 KHZ @ NOMINAL POWER)

< - 95 dB

MAXIMUM INPUT LEVEL (RCA – XLR)

+22 dBu (XLR input - INA audio differential line receiver)

MAXIMUM OUPUT LEVEL (XLR)

+16 dBu (5Vrms-diff.) max / U-GUARD™

INPUT IMPEDANCE

XLR : 18 kOhms/2 (com) - 36 kOhms (diff) - RCA ; 21 kOhms

OUTPUT IMPEDANCE (XLR)

480 Ohms/2 (com) - 960 Ohms (diff)

MAXIMUM GAIN (DEPENDING ON INTERNAL SWITCH : 0 OR +15DB)

29.8 dB / 44.8 dB

ACTIVE DRIVER EXCURSION CONTROL (« SUB » MODE ONLY)

X-GUARD™ Processing

CLIPPING MANAGEMENT/ “SOFT CLIPPING” (”SUB” & “SPEAKER” MODE)

U-GUARD™ Processing

AMPLIFIER THERMAL PROTECTION (POWER STAGE PROTECTION, “SUB” & “SPEAKER” MODE)

T- GUARD™ Processing Decrease of level (-15dB) with auto reset after 20 sec

SPEAKER THERMAL PROTECTION (VOICE-COIL PROTECTION, SUB MODE & SPEAKER MODE)

T- GUARD™ Processing - Power and duration according to settings Decrease of level (-15dB) with auto reset after 20 sec

BASS EXTENSION PROCESSING (”SUB” MODE ONLY)

X-TEND™ Processing Frequency response extension down to 20 Hz (SUB600S only)

CINEMA SCREEN COMPENSATION (”SPEAKER” MODE ONLY)

Processing CSC™ Progressive level correction from 1 to 20 Khz

ACTIVATABLE BASS MANAGEMENT IN “SPEAKER” MODE (DEPENDING ON SETUP)

High pass 80/100/120 Hz - 12 or 24 dB/oct on speakers outputs Adjustable low pass 35 to 150 Hz - 12 or 24 dB/oct on XLR outputs

ACTIVATABLE BASS MANAGEMENT IN “SUB” MODE (DEPENDING ON SETUP)

Adjustable low pass 35 to 150 Hz - 12 or 24 dB/oct on speakers outputs High pass 100 Hz - 12 or 24 dB /oct on XLR outputs

SPECIFIC DIGITAL CHAINING (S/PDIF WITH ASRC)

S/PDIF IN & OUT via RCA 75 Ohms / 96 kHz - résolution 24 Bits

LED INDICATORS

2 blue leds : device powered on 2 red leds : U-GUARD™ and T-GUARD™ 2 green leds : X-GUARD™

COOLING SYSTEM (SEPARATE REGULATION)

2 low noise fans - 2500 RPM Set in motion from 2 x 40 W RMS @ 22°C (Ambient temperature)

OPERATING TEMPERATURE

5° - 40°C

SHORT CIRCUIT PROTECTION

Yes

TRIGGER INPUT VOLTAGE (JACK MONO, 3.5MM)

12V DC

POWER SUPPLY

(auto) 100 - 240V / 50 - 60 Hz

POWER CONSUMPTION

Switched off by trigger (standby) : 400mW Mute (speaker disable) : 14W / Idle : 36W/ Max peak : 2300W

POWER CONSUMPTION

Switched off by trigger (standby) : 400mW Mute (speaker disable) : 14W / Idle : 36W/ Max peak : 2300W

2 rack mounting brackets / 4 half-spherical feet 1 power cord / 3 x 1.5² - 16 A Lenght : 1.5 m

Our Customer Reviews